These are used for isolation or to select and
changeover between AC loads or sources - eg. From automatic operation to
manual operation or off for servicing.
Used,
for instance, to select power from either generator/mains or inverter.
(Two position
on with centre-off 2-pole changeover panel mounted switches).
C/O-SW1
changeover & off switch
20 A
230
Vac
C/O-SW2
changeover & off switch
32 A
230
Vac
C/O-SW3
changeover & off switch
63 A
230
Vac
Inverter/Generator
Changeover Switch
Used
with inverter/chargers to select power from generator or inverter.
Enables inverter to be by-passed and isolated for testing, maintenance
or if very high loads need to be run. (Two position on with centre-off
2-pole changeover switch, mounted in enclosure).
Pre-wired to
terminal rail. Includes 30A input circuit breaker and indicators to show
operation mode.
C/O-SW4
Diesel/inverter changeover switch
32 A
230
Vac
Energy Monitors
Powermeter
This
is a plug-in meter that measures the energy consumption of an individual
appliance.
Simply plugs
in between the appliance and a socket to give power & cumulative energy
consumed. Especially useful to measure energy consumption of items such
as fridges.
Product Code:
PWR-MTR
Electrisave
Monitors
the total energy consumption of a household or building allowing wastage
to be eliminated. Displays electricity consumption, cost & associated
CO2 emissions, together with temperature & humidity.
Audible alarm can be set for
excess consumption. Uses a clip on wireless transmitter sensor and
portable LCD display with a range of 30m. Extra sensors needed for 2 or
3 phase supplies.
Product Code: ELCT-SV and
ELCT-SV/S for additional sensor
Used,
for instance, to select power from either generator/mains or inverter.
Used
with inverter/chargers to select power from generator or inverter.
Enables inverter to be by-passed and isolated for testing, maintenance
or if very high loads need to be run. (Two position on with centre-off
2-pole changeover switch, mounted in enclosure). 
This
is a plug-in meter that measures the energy consumption of an individual
appliance. 
Monitors
the total energy consumption of a household or building allowing wastage
to be eliminated. Displays electricity consumption, cost & associated
CO2 emissions, together with temperature & humidity.