T: 01568 760671   F: 01568 760484    info@windandsun.co.uk    Humber Marsh, Stoke Prior, Leominster, Herefordshire, HR6 0NR

BP Solar Photovoltaic Modules

 


BP Solar PV modules are solar cells (made from wafers of silicon crystals) laminated between impact resistant high transmission glass and EVA sealant. They are then built into rigid lightweight anodised aluminium framing to give a mountable structure. Some modules are also available as laminate only versions. Electrical connection is via weathertight junction boxes bonded directly to the laminate.

BP Solar’s modules use new enhanced cell coatings and manufacturing processes to improve power by 5% or more over standard modules to give increased reliability and performance. They have tight power tolerances and some of the best warranties in the industry - meaning more power for a longer period of time.

High power, high efficiency modules result in greater production of kilowatt hours per kilowatt peak installed, ie. maximum energy from minimum possible roof space.

Warranty: Modules are guaranteed to produce not less than the given percentage of minimum rated power at standard test conditions over listed period.

These industrial quality high performance modules are designed for reliability and minimum maintenance over at least 30 years. Recommended in situations where high outputs are required and ideal for use in larger system arrays. These are the standard 'building blocks' for all solar systems. They can be used to directly power DC loads or are used with charge controllers (to prevent battery overcharging) in battery storage systems or connected in series as the input for inverters (eg. Sunny Boy‘) for grid connected systems.

BP Solar High Performance Polycrystalline 3 Series

This series of modules provide superior value and performance for general use, operating DC loads directly, battery charging systems or with an inverter, AC systems.

They use time-tested multicrystalline silicon cells with an enhanced efficiency by the addition of improved silicon nitride (SiN) coatings. They are high power modules designed for maximum reliability.

Highly resistant to water, abrasion, hail impact and other environmental factors they are suitable for use in virtually any climate. Ideal for all types of solar systems from small battery charging systems up to large grid-connected arrays.




The BP380 uses 36 cells in series to charge 12 volt batteries and are the ideal building blocks for off-grid systems.

The BP3160N and BP3170N modules use 72 cells connected in series to give a nominal 24V output so their primary use is with inverters in large grid connected arrays.

Made in India/USA.
Power Tolerance: +/ -5%;
+/-3% for BP3160N & BP3170N
Warranty:
5 years materials & workmanship
12 years to 90% power
25 years to 80% power.

Module Number	Dimensions mm	Peak Output	Voltage@ Peak Output	Current@Peak Output	Weight	Data Sheets
BP Solar BP350J	839 x 537 x 50	50 Wp	17.3 V	2.89 A	6.0 kg	BP350J
BP Solar BP380J	1209 x 537 x 50	80 Wp	17.6 V	4.55 A	7.7 kg	BP380J
BP Solar BP3160N	1593 x 790 x 50	160 Wp	35.2 V	4.70 A	15.0 kg	n/a
BP Solar BP3170N	1593 x 790 x 50	170 Wp	35.5 V	4.80 A	15.4 kg	BP3170N

up to the top

BP Solar High Performance Monocrystalline '4 Series'

These advanced modules use latest high efficiency Monocrystalline antireflective coated cells for maximising energy generation from a limited area. They give excellent performance in low light, overcast conditions and high temperatures. Ideal for grid feeding applications.

Three bypass diodes mounted in the IntegraBus™ circuit board and laminated in the module provide effective protection of the cells from overheating when shaded and ensures long term reliability. Exceptional efficiency, high power modules designed for maximum reliability and premium power performance. Highly resistant to water, abrasion, hail impact and other environmental factors. Proven products with extensive field experience. Ideal for all types of solar systems. Applications include grid-connected building facades and roof systems, off-grid systems, telecommunication systems, and especially arrays requiring high energy density.

Uses 72 cells connected in series and their primary use is with inverters in large grid connected arrays. They have a -3%/+5% power tolerance and average power that is higher than nominal power.

Made in China
Power Tolerance: +5%, -3%
Warranty:
5 years materials & workmanship.
12 years to 93% power.
25 years to 85% power.

Module Number	Dimensions mm	Peak Output	Voltage@ Peak Output	Current@Peak Output	Weight	Data Sheets
BP4175T	1593 x 790 x 50	175 Wp	35.4V	4.90 A	15.4	BP4175T
BP4180T	1593 x 790 x 50	180 Wp	35.8V	5.03A	15.4	BP4180T

Advantages

Real Power:
All modules are delivered equal or above nominal power (typically 175Wp rated modules will produce 180Wp on average).

Greater Energy Yield:
Giving more kWh/kWp, so greater return on your investment.

Stronger Frame:
Anodised aluminium frames - the strongest in the industry to withstand wind and snow loads. Allows mounting even when modules are supported just at the ends.

Safer:
Better electrical insulation, mechanical strength and environmental resistance.

Leading Warranty:
Backed by one of the world's largest companies.

Smaller BP Modules

BP Solar SX Modules

Polycrystalline cells.

Laminated toughened glass with lightweight, anodised aluminium 'Universal' frame.  Highly resistant to water, abrasion, hail impact and other environmental factors.  Includes junction box which accepts cable or conduit and provides field-selection of either 6 or 12 V output.

Made in India/USA.Warranty: 10 years to 90%

Distributors for:                             

Copyright of Wind & Sun Ltd - no reproduction without express written permission unless for personal use. Registered in England & Wales, Company No.3403803 VAT Number GB 448 5458 14 Registered Office: Humber Marsh, Stoke Prior, Leominster, Herefordshire, HR6 0NR