'Sunny Boy' Controls and Data-Logging
Recording of data is best done using one of the
Sunny Boy Control units to store data and allow periodic downloading
of information either by direct connection to a PC or via telephone
modem. Suitable for all Sunny Boy, Windy Boy & Sunny
Island inverters.
Communications Data Sheet
Sunny Control Light
This is a good solution in smaller plants (up to 10
Sunny Boy inverters). Communication to the inverters is via
powerline modem and to a PC or external display via RS232. Stores 200
days of daily energy production data.
Product Code: SWR-CONTL
* This product has now been discontinued but there are special
offer prices on the remaining stock.
Sunny Control & Sunny Control Plus
These are suitable for plants of all sizes (up to 50
Sunny Boy inverters). Communication to the inverters I(COM1) is
via powerline (standard) or RS485. Communication to a PC or external
display is via RS232 or RS485. RS485 is necessary for distances greater
than 12m. They can also be used to switch on dedicated loads (eg.
washing machine) when PV energy production exceeds pre-set values,
enabling optimum on-site use of solar energy.
They store 1 year of daily energy production data.
A third serial port (COM3) can be fitted for RS232 or
RS485 to allow information to be presented simultaneously on PC and
external displays.
Sunny Control & Sunny Control Plus can be
supplied with a modem option (NET piggyback interface) for either Analog,
ISDN, GSM or Ethernet communication to allow remote access by PC and
automatic email of performance data. An RS232 is included for a local PC
or external display.
Sunny Control Plus allows other data to be
monitored and has 8 analogue and 8 digital ports to enable measurement
and data storage from almost any type of sensor. Compatible with
all SMA Sunny Boy, Windy Boy and Sunny Island inverters to provide
the perfect system monitors.
|
SWR-CONT |
Sunny Boy Control Unit |
|
SWR-CONTPLUS |
Sunny Boy Control Plus |
Sunny Control Plus Accessories
These
terminal blocks enable easy and clearly understandable wiring of
external inputs to the digital and analogue inputs to the Sunny
Control Plus.
Includes 25-pin 0.5m long female to male connector cable for
connection to Sunny Control Plus.
|
SBCOP-DIG-KIT |
Digital In/Out 25 way terminal block |
|
SBCOP-ANA-KIT |
Analogue In/Out 25 way
terminal block |
Sunny
WebBox
This
provides system monitoring, remote diagnostics, data storage and
visualization - the Sunny WebBox is the communication centre of your
solar power system. It continuously monitors the system giving early
detection of operational faults and logging of energy yields. Data is stored for easy analysis and automatic
transfer at pre-definable intervals. This can be use to give cost-free
data and graphic presentation on the Internet.
Data Sheet
Compatible with all SMA Sunny Boy, Windy
Boy & Sunny Island inverters to provide the perfect system
monitors.
Product Code: SB-WEBBOX
Sunny
Sensor Box
This
provides means of measuring weather conditions and checking performance
of a wind or solar system. Includes solar cell with +/- 8% accuracy. Optional
higher accuracy cells, wind anemometer, and temperature sensors.
Easy to connect via RS485 to Sunny WebBox or
Sunny Control and from there data can be transferred to a PC or
Sunny Portal for further analysis.
Data Sheet
Product Code: SU-SENSOR
Sunny
Portal
This is an
easy way of presenting performance of your solar or wind system on the
Internet. Can be used with Sunny WebBox or Sunny Control.
Allows system operation to be viewed from any PC with internet access
and allows automatic error and status messages to keep you informed.