Rolec EV Charging Points

These low-cost solutions are designed specifically for providing safe and secure AC charging for mode 2 electric vehicles, electric push bikes, scooters, mopeds and mobility vehicles, as well as doubling up as an outdoor IP65 rated maintenance socket.

• 13 amp IP65 rated outdoor charging/maintenance socket
• Unit prepared for future upgrade to mode 3 charging
• Built-in electrical protection
• Low-cost charging solution to meet building regulations

Simple, low-cost, easy-to-install, wall or post mountable mode 3 type 1 and type 2 charging staions ideal for EV charging at home.

• 16amp (3.6kW) or 32amp (7.2kW) single phase charging
• Type 2 socket and type 1 and type 2 5m tethered lead
• Built-in type A DC sensitive protection
• Built-in LED status indicator

Simple, low-cost, easy-to-install, wall or post mountable mode 3 type 2 charging station ideal for hotels, workplaces, leisure facilities, etc.

• 16amp (3.6kW) or 32amp (7.2kW) single phase charging
• Built-in type A DC sensitive protection
• Built-in LED status indicator
• OLEV WCS (workplace charging scheme) eligible

The WallPod EV: SOLARCharge is a cost-efficient EV charging unit which has been designed to benefit homeowners who have, or intend to install, a solar generation system.
By combining all of the ‘nation’s favourite’ WallPod:EV features with the added ability to monitor and respond to solar generation levels, the unit enables the homeowner to charge their EV from their PV.
This Mode 3 fast charging unit is compatible with all current PHEVs and EVs, and features two charging modes (Solar or Solar + Grid) which enable it to communicate Grid and solar consumption to the end user via a digital display screen.

The WALLPOD:EV SolarCHARGE is also able to operate as a stand-alone EV charger, allowing the homeowner to install it and charge purely from the Grid in anticipation of a future PV installation.

• IEC 61851-1 Mode 3 fast charging
• IEC 62196 (Type 2) charging socket and Type 2.5m tethered lead versions
• Charging speeds – 3.6kW (16A) & 7.2kW (32A)
• Built in backlit 2.4” LCD display screen
• Built in 2 mode selection button (Solar Only or Solar + Grid)
• Summary feature providing charging history, CO2 saved, etc.
• Monitors & tracks solar generation via the current transformer (CT) & data cable
• Built in DC sensitive protective device, electrical contactor & class 1 MID compliant kWh meter
• Supplied with external overload and fault current protection (RCBO)
• Certificated by the BSI as safe to use in the domestic environment
• Easy to install and maintain
• IP65 Weatherproof & UV stabilised
• Corrosion resistant, fire retardant & impact resistant design

This utility pedastal offers mode 3 type 2 charging and is ideal for semi-secure locations such as hotels, offices, factories, educational facilities, hospitals, fleet depots, etc.

• 16amp (3.6kW) or 32amp (7.2kW) single phase charging
• Secure lock-away charging socket
• Optional P.A.Y.G facility
• Built-in type A DC sensitive protection
• Built-in LED status indicator
• LED pedestal illumination

Can be bolted to concrete base using expansion bolts or EVGMCP0010 can be cast into concrete to enable mounting.

Heavy-duty, vandal resistant yet discrete mode 3 type 2 wall mountable charging station designed specifically for public locations such as hotels, offices, factories, retail outlets, leisure facilities, etc.

• Heavy duty, discreet wall mounted charging unit
• 16amp (3.6kW) or 32amp (7.2kW) single phase charging
• Single or dual outlet versions
• Standard colour: light grey body/dark grey fascia
• Secure lockaway charging socket – magnetic locks
• Keyswitch control as standard
• Optional P.A.Y.G facility
• Built-in type A DC sensitive protection
• Built-in LED status indicator

Charging leads 5m long with plugs each end

• J1772 (type 1) to IEC 621916 (type 2)
• IEC 62196 (type 2) to IEC 62196 (type 2 )

The Rolec Key Switch can be incorporated into Rolec EV charging points as a method of enabling/disabling charging. It is also available as a spare part.

When ordering please specify whether the Key Switch is to be incorporated into a charging point or will be a spare.

Aluminium signs to show the location of EV charging points.