Victron Interfaces and Cables
Victron Interfaces
V-MK3-USB interface allows conversion from VE Bus to USB for connection to a laptop and easy setup of inverter/chargers and other devices using Victron's VE Configure 3 software.
VE-DIR is used for comunication between a laptop and Victron VE.Direct devices
V-RS485-USB is used to communicate between the Victron energy meter and Victron Colour Control
- 5 years warranty
| Product Code | Description | Retail Price (ex VAT) |
|---|---|---|
| V-MK3-USB | Interface between Victron inverter & laptop for programming | £53.76 |
| VE-DIR | VE Direct to USB interface 1.5m cable | £21.84 |
| VE-DIR/RS232 | VE Direct to RS232 interface | £21.84 |
| VE-DIR/TX | VE Direct TX digital output cable | £7.56 |
| V-RS485-USB | RS485 to USB interface cable 1.8m | £21.84 |
| V-RS485-USB5 | RS485 to USB interface cable 5m | £24.36 |
| VE-CAN-RJ45 | VE.Can RJ45 Terminator (Pair) | £9.24 |
| USB-ADPRA | Right angle USB adapter for Colour Control | £5.94 |
| V-CON-GST18 | Victron Plug & socket for small VM & VES, GST style, 20A | £13.44 |
| V-USB-RA | USB extension cable 0.3m one side right angle | £5.88 |
Victron VE Direct Cables
The VE.Direct cable used for comunication between Victron VE.Direct devices, it's also used to connect a Victron battery monitor to the Victron Colour Control.
Available in different lengths with versions with both straight and 90 degree angle connectors.
| Product Code | Description | Retail Price (ex VAT) |
|---|---|---|
| VE-DD0.3 | VE Direct to Direct cable 0.3m | £11.76 |
| VE-DD0.3RA | VE Direct to Direct cable 0.3m right angle one side | £11.76 |
| VE-DD0.9RA | VE Direct to Direct cable 0.9m right angle one side | £11.76 |
| VE-DD1.8 | VE Direct to Direct cable 1.8m | £11.76 |
| VE-DD1.8RA | VE Direct to Direct cable 1.8m right angle one side | £11.76 |
| VE-DD3.0 | VE Direct to Direct cable 3.0m | £13.44 |
| VE-DD3.0RA | VE Direct to Direct cable 3.0m right angle one side | £13.44 |
| VE-DD5.0RA | VE Direct to Direct cable5.0m right angle one side | £14.28 |
| VE-DD10 | VE Direct to Direct cable 10m | £17.64 |
| VE-DD10RA | VE Direct to Direct cable 10m right angle one side | £17.64 |
Victron VE.Can to CAN-bus BMS cables
Use these VE.Can to CAN-bus cables to connect a CAN-bus enabled battery to a Venus-device.
| Product Code | Description | Retail Price (ex VAT) |
|---|---|---|
| VE-COMCABLE/BYD | VE.Can CAN-bus BMS Type A cable1.8m for BYD LV & Victron | £12.60 |
RJ45 UTP Cables
RJ45 UTP (unshielded twisted pair) cables for network communications.
| Product Code | Description | Retail Price (ex VAT) |
|---|---|---|
| C5-UTP0.5 | RJ45 UTP cable 0.5 metre blue booted | £1.07 |
| C5-UTP1 | RJ45 UTP cable 1 metre blue booted | £1.32 |
| C5-UTP1-LG | RJ45 UTP cable, 1 metre unbooted, bare one end | £3.74 |
| C5-UTP2 | RJ45 UTP cable 2 metre blue booted | £2.02 |
| C5-UTP3 | RJ45 UTP cable 3 metre blue booted | £2.66 |
| C5-UTP5 | RJ45 UTP cable 5 metre blue booted | £3.96 |
| C5-UTP10 | RJ45 UTP cable 10 metre blue booted | £7.41 |
| C5-UTP20 | RJ45 UTP cable 20 metre blue booted | £11.74 |
| C6-S0C-TLS | Tool -less UTP RJ45 socket module | £6.53 |
VE.Direct non inverting remote on-off cable
This cable is intended for on/off control of BlueSolar MPPT solar charge controllers with a VE.Direct interface. For example installing MPPTs in combination with a VE.Bus BMS.
The MPPT will be switched on when the source signal on the cable turns high. It will be switched off when the source signal turns low or becomes free floating.
| Product Code | Description | Retail Price (ex VAT) |
|---|---|---|
| VE-DIR/NI | VE Direct non inverting remote on-off cable | £15.12 |
| VE-DIR/NI-B | Non inverting remote on-off cable, bare ends, not VE DIR | £15.12 |
