Victron Inverters

Victron Pheonix inverters for converting battery voltage (12V, 24V, 48V DC) to mains voltage (230V AC) to run appliances.

Now with a VE.Direct port these inveters can be connected to:

• A computer (VE.Direct to USB interface cable needed)
• Apple and Android smartphones, tablets, macbooks and other devices (VE.Direct Bluetooth Smart dongle needed)

Configurable options:

• Low voltage alarm trip and reset levels
• Low voltage cut-off and restart levels
• Output voltage 210 - 245V
• Frequency 50Hz or 60Hz
• ECO mode on/off and ECO mode sense level

 Monitoring:

• In and output voltage and current alarms

• Remote on/off switching available for all models.
• 750VA (700W) model has optional remote control panel, DIP switches for 50/60Hz selection and Power Saving Mode to reduce no-load power consumption.
• AC output is via IEC-320 sockets (male plug included).
• Complete with 1.5m battery cables.
• 5 years warranty

• Up to 6 units can operate in parallel to achieve higher power output.
• Operation in 3-phase configuration is also possible.
• Internal relay can be used to signal an alarm or control a generator.
• All models include RS-485 port. Using the Victron MK3 interface all inverter parameters can be customised using a PC.
• Inverters can also be monitored via VENet or other monitoring & control systems.
• 5 years warranty.

Powerful and reliable inverters that include built-in Bluetooth to enable full configuration using a tablet or smartphone 

Features:

• Low battery voltage alarm  
• Low battery voltage cut-off and restart levels 
• Dynamic cut-off: load dependent cut-off level 
• Output voltage: 210 - 245V 
• Frequency: 50 Hz or 60 Hz 
• ECO mode on/off and ECO mode sense level 
• Alarm relay 

Monitoring: 

• In- and output voltage, load and alarms 

Proven reliability

Inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.

High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.

ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on.

Remote on/off
A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).

VE.Direct communication port
The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters.

Warranty: Five Years

This panel is intended for remote on/off control of all the VE.Direct Phoenix inverter models.

Simply connects to inverter using two wires.

LED indicator shows when inverter is On.

For Phoenix Inverters equipped with a UTP remote monitoring and control socket. Includes on/off switch and indicators for Inverter On; Overload; Low battery; temperature;