Back-Up Battery Storage Kits

This Victron ESS battery storage add-on is an ideal self-consumption and back-up power system to add battery storage to new or existing solar PV systems. Suitable for use with PV systems up to 5kWp

Consider adding:

• V-CC-WIFILR WiFi to USB interface to connect the Colour Control GX to the router over WiFi for remote monitoring
• VCS-RJ45UTP10 additional UTP cable to connect the Colour Control GX to the router for remote monitoring

Additional components also required:

• Power supply cable for Colour Control (see manual)

In this kit

• 1 x VM-48/5000/70-100 | Victron MultiPlus 5000VA, 48V inverter charger
• 1 x BYD-BBOX-CAB | BYD Battery Box cabinet (4x2.5) including BMU, 48V
• 4 x BYD-B-PLUSL | BYD B-Plus LV battery module 2.56 kWh inc cable set, 48V
• 1 x SI-BATBREAKER.01-200 | Battery/Inverter Breaker in enclosure (1 way)
• 2 x INV-CB2 | Inverter cable 70 sqmm 2 m long M8-M8
• 1 x V-CC-GX | Victron Colour Control GX Display
• 1 x V-CC-WM | Victron Colour Control Wall Mount Box
• 2 x C5-UTP2 | RJ45 UTP cable 2 metre blue booted
• 1 x V-MK3-USB | Interface between Victron inverter & laptop for programming
• 1 x C5-STPCW-3 | Cross wire comms cable for LG LV and BYD LV battery, 3m

This uses the SMA Sunny Island and BYD LiIon battery as part of the SMA Flexible Storage System to provide back-up power in the event of power cut whilst continuously helping to reduce electricity bills by storing solar energy from a PV system to be used when it's needed.

• Ideal for residential and small businesses
• Capability to upgrade almost any PV system
• AC coupled
• Allows automatic load control

Contains:

• A Sunny Island inverter/charger - to convert 48 VDC (battery power) to 230V AC (grid power) and vice versa
• BYD battery in two cabinets totalling six modules ~15kWh
• Battery breaker and cables
• Sunny Home Manager 2.0 for monitoring and control of the system - to make a more efficient system and give you information on the distribution of energy
• Automatic switch box including G59/3 relay and earth neutral switching

Not Included:

• Communication cables
• An SMA Energy Meter would be advised if the solar inverter is a brand other than SMA or does not have Speedwire

In this kit

• 1 x SI-6.0H-12 | Sunny Island Inverter, 4.6kW, 48V, 0-90A charger, WLAN
• 2 x BYD-BBOX-CAB | BYD Battery Box cabinet (4x2.5) including BMU, 48V
• 6 x BYD-B-PLUSL | BYD B-Plus LV battery module 2.56 kWh inc cable set, 48V
• 1 x SI-BATBREAKER.01-200 | Battery/Inverter Breaker in enclosure (1 way)
• 6 x INV-CB3-BB | Inverter cable 95 sq mm 2 m long for SI-BATBREAKER M8-bare
• 1 x HM-20 | Sunny Home Manager 2.0 inc power measurement 1/3ph Ethernet
• 1 x CT-100/5-SPLIT | 100/5A Split CT Class 1, 24mm dia cable transit hole, 1m cab
• 1 x SI-BBD-1 | 1ph battery backup G59 switch box, 14.5kW (exc HM-2.0)

With an SMA Flexible Storage System with battery backup function, a PV system will have the ability to allow you to use most or all of your generation - and maintain the electricity supply throughout a grid failure.

Contains:

• A Sunny Island inverter/charger - to convert 48 VDC (battery power) to 230V AC (grid power) and vice versa.
• Sunny Island Speedwire data module for communication.
• 14kWh Gel lead acid battery - to store the energy when it’s generated, for use when it’s needed.
• Sunny Home Manager 2.0 with CT clamp for monitoring and control of the system - to make a more efficient system and give you information on the distribution of energy.
• Automatic switch box including G59/3 relay and earth neutral switching
• Battery/inverter DC breaker box

Additional components also required:

• Communication cables for Sunny Island and Home Manager

Note: Additional/longer battery cables may be required depending layout

In this kit

• 24 x RB-S2-567GEL | Rolls OPzV GEL, 2V, 782Ah (C100) , 567Ah (C10)
• 1 x SI-BATBREAKER.01-200 | Battery/Inverter Breaker in enclosure (1 way)
• 1 x CT-100/5-SPLIT | 100/5A Split CT Class 1, 24mm dia cable transit hole, 1m cab
• 1 x SI-8.0H-12 | Sunny Island Inverter, 6.0kW, 48V, 0-115A charger, WLAN
• 1 x SI-BBD-1 | 1ph battery backup G59 switch box, 14.5kW (exc HM-2.0)
• 1 x HM-20 | Sunny Home Manager 2.0 inc power measurement 1/3ph Ethernet
• 4 x INV-CB3-BB | Inverter cable 95 sq mm 2 m long for SI-BATBREAKER M8-bare