Labels for Wind Systems
Jump To:
Wind Label Pack Warning dual supply label Inverter label Do not disconnect plugs and sockets label Warning supplied from wind turbine label Wind turbine isolator label Wind turbine junction box label Wind system point of emergency isolation label Wind system generation meter labelSuitable labelling for wind systems as required by MCS guidelines.
Labels are printed on self adhesive vinyl and are designed to remain legible and in place throughout the design life of the system. The Wind & Sun label packs are suitable for typical domestic systems or labels are available in sheets of one type.
Large quantities are also available on a roll by request.
Wind Label Pack
Pack containing labels needed for a typical domestic wind turbine installation
| Product Code | Description | Retail Price (ex VAT) |
|---|---|---|
| LBL/PACK2 | Wind System label pack | £3.30 |
Warning dual supply label
Dual supply labelling should be provided at the service termination, meter position and all points of isolation between the PV system and supplier terminals to indicate the presence of on-site generation and indicating the position of the main a.c. switch disconnector.
110 W x 50 H mm
| Product Code | Description | Retail Price (ex VAT) |
|---|---|---|
| LBL/01 | Warning Dual Supply label | £0.80 |
Inverter label
It is recommended that Inverters carry a sign stating "Inverter - isolate a.c. and d.c. before carrying out work"
Ideally a label stating "not to block ventilation" will be placed next to the inverter to ensure the customer does not block the vents of the inverter, this can cause a loss in system performance as the inverter will de-rate when it reaches its maximum operating temperature.
90 W x 30 H mm
| Product Code | Description | Retail Price (ex VAT) |
|---|---|---|
| LBL/02 | Inverter label | £0.30 |
Do not disconnect plugs and sockets label
Connectors readily accessible to ordinary persons shall be of the locking type, requiring a tool or two separate actions to separate and shall have sign attached that reads: 'Do not disconnect d.c. plugs and sockets under load'.
140 W x 15 H mm
| Product Code | Description | Retail Price (ex VAT) |
|---|---|---|
| LBL/04 | Do not disconnect DC plugs & sockets under load label | £0.30 |
Warning supplied from wind turbine label
For use on all equipment directly supplied by a wind turbine.
120 W x 30 H mm
| Product Code | Description | Retail Price (ex VAT) |
|---|---|---|
| LBL/10 | Warning - Supplied from Wind Turbine label | £0.30 |
Wind turbine isolator label
For use on wind turbine output isolator enclosure.
90 W x 30 H mm
| Product Code | Description | Retail Price (ex VAT) |
|---|---|---|
| LBL/11 | Wind Turbine Isolator label | £0.20 |
Wind turbine junction box label
For use on all wind turbine output cable junction boxes.
90 W x 30 H mm
| Product Code | Description | Retail Price (ex VAT) |
|---|---|---|
| LBL/12 | Wind Turbine Junction Box label | £0.20 |
Wind system point of emergency isolation label
For use on all AC switches/disconnects.
(ON and OFF positions should be clearly labelled)
60 W x 20 H mm
| Product Code | Description | Retail Price (ex VAT) |
|---|---|---|
| LBL/13 | Wind System Point of Emergency Isolation label | £0.15 |
Wind system generation meter label
For use to identify the wind system generation meter.
60 W x 10 H mm
| Product Code | Description | Retail Price (ex VAT) |
|---|---|---|
| LBL/14 | Wind System Generation Meter label | £0.08 |
