Victron Battery Monitors

Bookmark and Share

Victron Battery Monitors

The Victron battery monitors precisely measure the power going in/out of the battery to exactly determine the battery state of charge.

Displays:

  • battery voltage
  • charge/discharge current
  • amp-hours consumed
  • time remaining at current rate of discharge

Visual and audible alarms:

  • over and under voltage
  • and/or battery discharged

Includes programmable alarm or generator start relay.

The VBMV-702 adds the ability to connect a second battery for monitoring two battery systems.

  • 5 years warranty
Victron BMV 700 - State Of Charge
Victron BMV 700 - Power Victron BMV 700 - Voltage Victron BMV 700 - Current Victron BMV - Shunt
Product Added! click here to view basket Failed! Could not add product to basket, please try again.
Product Code Description Retail Price
(ex VAT)
VBMV-702 Victron Precision Battery Monitor 9.0 - 90VDC(2nd Bat input) £133.56
VBMV-700S Victron Precision Battery Monitor 9.0- 90VDC, inc shunt, M10 £107.52
VBMV-712 Victron Precision Battery Monitor Smart 9.0 - 90VDC £154.56
VBMV-TS Temperature Sensor for BMV-702 & 712 £18.48

Victron wall mount enclosure for BMV or MPPT Control

This Victron wall mount enclosure enables you to surface mount the Victron BMV battery monitor or MPPT Control charge controller display. Surface mounting makes installation much simpler and quicker rather than panel mounting where you need to recess the product.

Victron Wall Mount Enclosure For BMV Or MPPT Control
Victron Wall Mount Enclosure For BMV Or MPPT Control Victron wall mount enclosure for BMV or MPPT Control Victron Wall Mount Enclosure For BMV Or MPPT Control
Product Added! click here to view basket Failed! Could not add product to basket, please try again.
Product Code Description Retail Price
(ex VAT)
VBMV-WM Victron Battery Monitor or MPPT Control surface mount box £21.84

Victron wall mount enclosure for Colour Control & BMV

This Victron wall mount enclosure enables you to surface mount the Victron Colour Control display and the Victron BMV battery monitor in one enclosure. Surface mounting makes installation much simpler and quicker rather than panel mounting where you need to recess the product.

Victron Wall Mount Enclosure For BMV And Color Control GX
Victron Wall Mount Enclosure For BMV And Color Control GX Side Victron Wall Mount Enclosure For BMV And Color Control GX With Products
Product Added! click here to view basket Failed! Could not add product to basket, please try again.
Product Code Description Retail Price
(ex VAT)
V-CCBMV-WM Victron Wall Mount Enclosure for BMV & Colour Control £36.96

Victron Interfaces

V-MK3-USB interface allows conversion from VE Bus to USB for connection to a laptop and easy setup of inverter/chargers and other devices using Victron's VE.Net.

VE-DIR is used for comunication between a laptop and Victron VE.Direct devices

VE-DD...  is used for comunication between Victron VE.Direct devices, it's also used to connect a Victron battery monitor to the Victron Colour Control.

V-RS485-USB is used to communicate between the Victron energy meter and Victron Colour Control

VZIG-RS485 & VZIG-RS485 are used for wireless communication

VE-DIR/NI is intended for on/off control of BlueSolar MPPT solar chargers with a VE.Direct interface

  • 5 years warranty
Victron Inverter Interface MK2-USB
Victron VE.Direct To USB Interface Front Victron VE.Can RJ45 Terminator
Product Added! click here to view basket Failed! Could not add product to basket, please try again.
Product Code Description Retail Price
(ex VAT)
V-MK3-USB Interface between Victron inverter & laptop for programming £51.24
VE-DIR VE Direct to USB interface 1.5m cable £21.00
VE-DD0.3 VE Direct to Direct cable 0.3m £10.92
VE-DD1.8 VE Direct to Direct cable 1.8m £10.92
VE-DD3.0 VE Direct to Direct cable 3.0m £12.60
VE-DD10 VE Direct to Direct cable 10m £16.80
VE-DIR/NI VE Direct non inverting remote on-off cable £18.48
VE-DIR/NI-B Non inverting remote on-off cable, bare ends, not VE DIR £18.48
V-RS485-USB RS485 to USB interface cable 1.8m £43.68
V-RS485-USB5 RS485 to USB interface cable 5m £66.36
VE-CAN-RJ45 VE.Can RJ45 Terminator (Pair) £9.24
VZIG-USB Zigbee to USB converter £73.92
VZIG-RS485 Zigbee to RS485 converter £84.84
USB-ADPRA Right angle USB adapter for Colour Control £5.94

Victron Battery Monitor Communication Cable

Communication cable to connect a Victron battery monitor to its shunt.

Note: Victron battery monitors include a longer version of this cable, use this cable for shorter distances and tidier cabling.

Product Added! click here to view basket Failed! Could not add product to basket, please try again.
Product Code Description Retail Price
(ex VAT)
C12-RJ1.5 Comms cable for Victron battery monitor 1.5m £4.30