Schletter Special Fasteners

Bookmark and Share

A wide range of components and systems to facilitate the fastening of almost any module configuration to almost any roof and provide an MCS012 certified solar PV mounting system.

Schletter Logo

Schletter Hanger Bolts

Used for fastening mounting rails to corrugated roofs. Hanger bolt is screwed through the roof cladding and an adaptor plate bears the mounting rail. A UV-resistant EPDM sealing washer and collar are used to seal the drilled hole.

In the case of purlin roofs rails are usually mounted vertically and modules horrizontally on them.

Hanger bolt kit comprises:

  • Hanger bolt
  • Vulcanized EPDM seal (UV resistant)
  • 3 x flange nuts 
Schletter Fast Kit For Corrugated Roofs M10x200mm Klick Top (111110-200)
Schletter Fast Kit For Corrugated Roofs M12x300mm Klick Top (111112-300)
Product Added! click here to view basket Failed! Could not add product to basket, please try again.
Product Code Description Retail Price
(ex VAT)
SCH-110010-200 Hanger Bolt Kit M10 x 200 assembled £2.42
SCH-110012-200 Hanger Bolt Kit M12 x 200 assembled £4.06
SCH-110012-300 Hanger Bolt Kit M12 x 300 assembled £4.75
SCH-119001-000 Klick Top attachment for hanger bolt M10/M12 £2.80
SCH-119033-001 Universal Adapter Uno M10/M12 - for M10/M12 hanger bolts £2.12

Schletter SingleFix Pro

A fast and simple fastening system for self-supporting trapezoidal
sheet metal roofs for use with ProLine or Solo5 rail

  • Suitable for most trapezoidal steel sheet roofs from 0.5mm (0.02') thickness and aluminium sheet roofing from 0.8mm (0.03') thickness and bead height > 22mm.
  • No need to fasten to the roof substructure
  • Panels can be mounted in portrait or landscape
    • (landscape by clamping on the short edge)
  • Quick to install
  • Sold as single piece without screws (use SCH-943000-360)
  • Compatible with both ProLine series and classic Schletter mounting rails
  • Screws (SCH-943000-360) must be ordered separately as needed (2 pieces for each SingleFix Pro)

For use with both Rapid 16 and Proline module clamps

Product Added! click here to view basket Failed! Could not add product to basket, please try again.
Product Code Description Retail Price
(ex VAT)
SCH-113009-003 SingleFix Pro Single (screws required additionally) £1.61

Schletter Fix-Z-7 and Fix-Z-15

For flat trapezoidal sheet roofs with less than a 10-degree slope, module installation parallel to the roof is not always optimal, due to low yields and inadequate module self-cleaning.

The FixZ system can be used for all common 60- to 72-cell framed modules to increase tilt angle giving an increase in tilt angles of between 5 and 7 degrees with FixZ-7, and 11 to 15 degrees with FixZ-15.

Pairs of Upper and Lower 450mm profiles are used, each in conjunction with a SingleFix-V Solo twin kit.

For use with Rapid 16 module clamps only

Schletter FixZ-7
Schletter Fix-Z-7 and Fix-Z-15 Schletter Fix-Z-7 and Fix-Z-15 Schletter Fix-Z-7 and Fix-Z-15 Schletter Fix-Z-7 and Fix-Z-15
Product Added! click here to view basket Failed! Could not add product to basket, please try again.
Product Code Description Retail Price
(ex VAT)
SCH-121001-202 FixZ-7 upper system rail18 - 450mm £11.42
SCH-121010-202 FixZ-7 lower system rail18 - 450mm £8.08
SCH-121008-202 FixZ-15 upper system rail18 - 450mm £25.55
SCH-121009-202 FixZ-15 lower system rail18 - 450mm £9.15

Schletter ClampFit Pro Fastener

The Schletter ClampFit Pro Fastener is a simple and cost-efficient solution for mounting modules in landscape on trapezoial metal roofs with a minimum thikness of 0.5 mm.

  • Less storage space required
  • Quick to install
  • Minimum trapezoidal beading height: 34mm
  • Maximum trapezoidal pitch 45°
  • Module clamps to suit module frame thickness must be ordered separately.
  • Screws must be ordered separately as needed (2 pieces/ClampFit Pro)

For use with Proline module clamps only

Schletter ClampFit Fastener 130004-100 Schletter ClampFit In Use
Product Added! click here to view basket Failed! Could not add product to basket, please try again.
Product Code Description Retail Price
(ex VAT)
SCH-130004-300 ClampFit Pro Fastener, screws & clamps required additionally £3.54

Schletter Cross Connector Pro

Used to allow horizontal mounting rails to be quickly & easily fastened to vertical rails.

 Comprises:

  • KlickTop attachment with M8 bolt
  • M8 square nut for Klick groove
  • KlickIn click component for M8 nut

For use with Proline module clamps only

Schletter Klick Top Cross Connector Kit M8 With Screw Klick + Square Nut (129004-0000)
Product Added! click here to view basket Failed! Could not add product to basket, please try again.
Product Code Description Retail Price
(ex VAT)
SCH-129063-010 Cross Connector Rapid Pro £3.79

Schletter Cross Connector

Used to allow horizontal mounting rails to be quickly & easily fastened to vertical rails.

 Comprises:

  • KlickTop attachment with M8 bolt
  • M8 square nut for Klick groove
  • KlickIn click component for M8 nut

For use with Rapid 16 module clamps only

Schletter Klick Top Cross Connector Kit M8 With Screw Klick + Square Nut (129004-0000)
Product Added! click here to view basket Failed! Could not add product to basket, please try again.
Product Code Description Retail Price
(ex VAT)
SCH-129063-000 Rapid Cross Connector £3.79

Schletter Standing Seam Clamps

Schletter Standing Seam Clamp 504 AL KalZip 112002-003
Product Added! click here to view basket Failed! Could not add product to basket, please try again.
Product Code Description Retail Price
(ex VAT)
SCH-112002-003 Standing seam clamp 510 Rapid for kalZip a.s £3.65

Schletter Wood Screws

Wood screws for fixing Schletter roof hooks.

Wood Screw
Product Added! click here to view basket Failed! Could not add product to basket, please try again.
Product Code Description Retail Price
(ex VAT)
SCH-942208-080 M8 x 80mm galvanised wafer-head TX wood screw £0.31
SCH-943208-080 M8 x 80mm TX VA wafer-head wood screw £0.31
SCH-942208-100 M8 x 100mm galvanised wafer-head TX wood screw £0.31
SCH-942208-120 M8 x 120mm galvanised wafer-head TX wood screw £0.36

Schletter FixE

Designed especially for a safe fastening to corrugated fibre cement roofs on a steel substructure avoiding breakage and leaks.

Due to the utilisation of distance tubes, the fastening system FixE transfers fastening forces and possible bending moments safely into the substructure (such as sheet metal Z purlins). A specially shaped gasket made of UV-resistant EPDM-rubber serves as a sealing.

System comprises:

  • Aluminium Universal adaptor top piece
  • M8 stainless steel threaded screws with vulcanized EPDM-seal (UV-resistant)
  • Sealing cap to suit corrugated sheet
  • Aluminium distance spacer tube. Available in 1m lengths for cutting to size to suit different corrugated profile heights.
Schletter FixE Size 1 Single Fastening Kit 111006-000
Product Added! click here to view basket Failed! Could not add product to basket, please try again.
Product Code Description Retail Price
(ex VAT)
SCH-119004-003 Spacer Alu 20 1m £10.74
SCH-119005-000 Sealing cap corrugated sheet 5/6/8 £1.04
SCH-119033-002 Universal Adapter Uno M8 £2.12
SCH-943763-064 Screw 6.3x64min.1.5mm self-tapping A2 £0.26
SCH-943718-100 Screw 8x100 min 1.5 self tapw.wash A2 £1.03
SCH-943763-115 Screw 6.3x115min.1.5mm self-tapping A2 £0.46
SCH-943763-200 Screw 6.3x200min.1.5mm self-tapping A2 £0.90

Schletter Screws and Small Parts

Product Added! click here to view basket Failed! Could not add product to basket, please try again.
Product Code Description Retail Price
(ex VAT)
SCH-129010-008 Klickin click component for M8 nut £0.08
SCH-943000-360 Drill screw 6.0 x 25 self tapping seal A2 £0.34
SCH-943308-120 M8 x 20 int.hex. und-head DIN912 A2GMB screw £0.19
SCH-943308-125 M8 x 25mm screw £0.18
SCH-943308-135 M8 x 35mm screw £0.18
SCH-943308-40 M8 x 40mm screw £0.48
SCH-943410-025 M10 x 25mm square A2 GMB screw, slots into rail £0.44
SCH-943755-925 Self drilling screw 5.5x25 A2 £0.37
SCH-943912-010 Flange nut M10 w/ interlocking teeth DIN6923 A4 £0.23
SCH-943914-008 M8 square nut £0.14
SCH-119005-001 Universal Calotte with EPDM £1.61
SCH-943922-008 Big Washer M8 DIN9021 A2 £0.08