Low Voltage Pumps

These are designed for intermittent use and are ideal for irrigation, emptying tanks, transferring fluids or hosing.

They can be used in-line with a gravity feed or submerged in liquid (clean, foul or sea water). The Amazon, Congo & Nile are continuously rated (Niagara 20 min) and can pump diesel. The Amazon can be used in hot water systems (up to 80ºC). Outlet is a 12m (0.5") hose barb, inlet has removable strainer with another hose barb for in-line use. Fits inside water containers or a 2" well casing. Complete with cable.  Amazon & Congo supplied with cable & battery clips.

These simply connect to a 12V battery to provide an instant pumping system!

Both kits include:

• 12V Pump;
• 4m hose with  spray nozzle;  
• 4m cable and battery clips.

Niagara kit suitable for:

• Fresh and salt water
• Water transfer, deck shower, or deck wash
• Water Systems to 60 ºC

Amazon kit suitable for:

• Diesel, fresh and salt water
• Quick diesel transfer with no spillage
• Water transfer, deck shower, or deck wash
• Water Systems to 80 ºC

Intermittent rating of 20 minutes but should not be run dry for long periods

High efficiency low consumption submersible marine bilge pumps, can also be used for other applications eg. fountains etc.

Float switch operates pump as water level rises. R-500 has 3/4" hose outlet; R-1000 & R-2000 1.1/82; R-4000 2"

This can be directly connected to a PV module to provide water circulation in domestic solar water heating systems.

High efficiency, with low power consumption and integrated MPP tracking to give optimum performance. Shaftless spherical motor technology inside a bronze housing ensures a long, maintenance free and quiet service life. Soft-start enables the pump to start on less than 1 W of power in low light levels then increase flow as light increases. Suitable for maximum water temperature of 95 deg C. Integrated over-temperature protection first slows down the pump then shuts it off if temperature gets too high. 1/2” female thread inlet/outlet.