Wind Turbines

The Leading Edge LE-300 wind turbine, efficient, compact, quiet and considered to be the most rugged and reliable horizontal axis wind turbine in its class.

Available in 12V, 24V and 48V options to suit various battery charging applications. (48V option available on request)

A marine version of this turbine is also available by request which is fully optimised for marine conditions. This, the standard, version is ideal for off-grid home and industrial applications on land.

The controller is an integrated solution designed to prevent 12 or 24 Volt batteries from overcharging. It incorporates a 300 Watt resistor / heater and controller board in a stout powder coated steel enclosure.

Features

• Durable and reliable - designed to withstand storm force winds up to 27m/s (60mph)
• Powerful - 85W at wind speeds of 8m/s (18mph)
• Lightweight head - reduced loading on tower and easier to install
• Whispower blades - aerofoil blade design developed specifically for this turbine generate low acoustic emissions
• Rugged - aluminium alloy and stainless steel components are protected with aerospace grade coatings and anodising
• 5 year warranty
• Made in the UK

Specifications

• Rotor Diameter: 1 metre
• Rotor Type: 3-Blade upwind
• Blade Material: Glass Reinforced, UV resistant Nylon
• Rated Output: 85W at 8m/s (18mph)
• Peak Output: 300W
• Cut-in speed: 3m/s (6.7mph)
• Weight: 6.5kg
• Generator Type: 3-Phase Brushless NIB rotor PMA
• Mounting Pole: 48.3 or 50.0mm outer diameter (3mm wall thickness)
• Output Voltage: 12, 24 or 48V

Rating: 160 watts @ 8m/s (17.8mph) wind
Peak output: 750 watts @ 18m/s (40mph)
Voltage: 12, 24 or 48 volts DC.
Rotor Diameter: 1.54m
Cut In Windspeed: 3m/s (6.7mph)

Downwind wind turbine capable of producing output of up to 750W.

The LE-600 wind turbine is often used as a wind power addition to an existing off grid power system to compliment Solar PV in order to provide more power in the winter months and cut down on diesel usage. Other applications include remote industrial systems, water pumping systems and lighting and power in remote farm buildings – any application with a moderate power requirement.

Designed for industrial applications in harsh environments. Unique low inertia axial flux generator which utilises Neodymium rare earth magnetic materials to allow the turbine to spin in the lightest of breezes and to react quickly to gusts.

Manufactured from hard anodized and powder coated high quality aluminium alloys and stainless steel with sealed for life bearings, so no greasing or maintenance is required.

Used with TriStar TS diversion load controllers to control charge to batteries.

These dump loads are designed to be connected to Morningstar Tristar TS-45 or TS-60 diversion controllers to 'bleed-off' surplus power when batteries are fully charged.

500W loads for LE-300 and LE-450 (For 12V, 24V or 48V systems).

1000W loads for LE-600 (For 24V or 48V systems).

This allows the turbine to be electrically isolated from the battery systems whilst also bringing the turbine to a near stop by placing a short circuit across the turbine output by putting the alternator into ‘dynamic braking’ mode. Supplied in a pre-assembled, compact IP65 enclosure making it easy to wire-in and mount.