Collection: Marlec

View as:

11 products

  • Furlmatic FM-1803

    Furlmatic FM-1803

    3 models available
    From £2,200.79

    Rating: 404 W in a 11 m/s (24.6 mph) wind.
    Voltage: 12,24 or 48 volts DC.
    Rotor Diameter: 1.8m
    Cut In Windspeed: 3 m/s (6.7 mph)

  • Furlmatic FM910-4

    Furlmatic FM910-4

    2 models available
    From £679.96

    Rating: 72 W in a 11 m/s (24.6 mph) wind.
    Voltage: 12 or 24 volts DC.
    Rotor Diameter: 0.91m
    Cut In Windspeed: 2.5 m/s (5.6 mph)

  • Marlec iBoost 5m Extension for Sender/Clamp

    Marlec iBoost 5m Extension for Sender/Clamp

    £15.12

    This 5m extension for Solar iBoost+ allows extension of the cable between the sender and the clamp sensor. This can be useful in properties with thick walls where moving the sender to the other side of a wall will help ensure good signal strength between the Solar iBoost+ and the sender.

  • Marlec iBoost Buddy

    Marlec iBoost Buddy

    £121.03

    The Marlec iBoost Buddy enables remote monitoring and boost control of the Solar iBoost+ immersion controller.

  • Marlec Solar iBoost+

    Marlec Solar iBoost+

    £379.15

    The Marlec Solar iBoost+ automatically diverts excess solar generation (normally exported to the grid) to an immersion heater saving money on water heating costs, reducing use of the boiler and increasing self-consumption of free solar energy.

  • Rutland 1200 Windcharger

    Rutland 1200 Windcharger

    6 models available
    From £144.45

    Rating: 290 W in a 11 m/s (24.6 mph) wind.
    Voltage: 12 or 24 volts DC.
    Rotor Diameter: 1.2m
    Cut In Windspeed: 2.5 m/s (5.6 mph)

  • Rutland 914 Marine Mounting Kit

    Rutland 914 Marine Mounting Kit

    2 models available
    From £150.13

    Used to mount the Rutland 914 Windcharger on boats

  • Rutland 914/Furlmatic 910 Land Tower Kits

    Rutland 914/Furlmatic 910 Land Tower Kits

    £325.20

    Suitable for erection onto concrete foundations. Recommended for all permanent installations.
    Consists of three 2.13m long tower sections with joiners complete with rigging kit which includes:

  • Rutland 914i Windcharger

    Rutland 914i Windcharger

    2 models available
    From £663.29

    Rating: 140 W in a 11 m/s (24.6 mph) wind.
    Voltage: 12 or 24 volts DC.
    Rotor Diameter: 0.91m
    Cut In Windspeed: 3.1 m/s (6.9 mph)

  • Rutland Accessories

    Rutland Accessories

    2 models available
    From £84.93

    HRSI Regulator
    Uses Pulse Width Modulation (PWM) to protect battery from overcharging by tapering charge as battery becomes full and reducing the Windcharger speed. Includes LED indicators for charging status and battery voltage. Includes facility for connection of up to 160W of PV. Features windcharger shutdown switch.

  • VEVA EV Charger

    VEVA EV Charger

    2 models available
    From £520.00

    The VEVA is a UK-made, next-generation EV (electric vehicle) charger. The VEVA has been designed to be intuitive and user-friendly, whilst installers benefit from quick and simple commissioning.

*see manufacturer's documentation for further information