BP Solar PV Modules or Panels: 3 Series and SX modules

PRICES

Also see the section on inverters

BP Logo

BP Solar Photovoltaic Modules are solar cells (made from wafers of silicon crystals) laminated between impact resistant high transmission glass and EVA sealant. They are then built into rigid lightweight anodised aluminium framing to give a mountable structure. Some modules are also available as laminate only versions. Electrical connection is via weathertight junction boxes bonded directly to the laminate.

BP Solar’s modules use new enhanced cell coatings and manufacturing processes to improve power by 5% or more over standard modules to give increased reliability and performance. They have tight power tolerances and some of the best warranties in the industry - meaning more power for a longer period of time.

High power, high efficiency modules result in greater production of kilowatt hours per kilowatt peak installed, ie. maximum energy from minimum possible roof space.

Warranty: Modules are guaranteed to produce not less than the given percentage of minimum rated power at standard test conditions over listed period.

These industrial quality high performance modules are designed for reliability and minimum maintenance over at least 30 years.

Recommended in situations where high outputs are required and ideal for use in larger system arrays. These are the standard 'building blocks' for all solar systems.

They can be used to directly power DC loads or are used with charge controllers (to prevent battery overcharging) in battery storage systems or connected in series as the input for inverters (eg. Sunny Boy‘) for grid connected systems.

BP Solar High Performance Polycrystalline '3 Series'

BP3125

This series of modules provide superior value and performance for general use, operating DC loads directly, battery charging systems or with an inverter, AC systems.

They use time-tested multicrystalline silicon cells with an enhanced efficiency by the addition of improved silicon nitride (SiN) coatings.

They are high power modules designed for maximum reliability.

Highly resistant to water, abrasion, hail impact and other environmental factors they are suitable for use in virtually any climate.

Ideal for all types of solar systems from small battery charging systems up to large grid-connected arrays.

The BP380 & BP3125 use 36 cells in series to charge 12 volt batteries and are the ideal building blocks for off-grid systems.

The BP3165N and BP3170N modules use 72 cells connected in series to give a nominal 24V output so their primary use is with inverters in large grid connected arrays.

Made in India/USA.

Power Tolerance: +/ -5%; +/-3% for BP3165S &BP3170S

Warranty:

5 years materials & workmanship

12 years to 90% power

25 years to 80% power

Module Number

Dimensions mm

Peak Output

Voltage@ Peak Output

Current@Peak Output

Weight

Data Sheets

BP Solar BP350U

839 x 537 x 50

50 Wp

17.3 V

2.89 A

6.0 kg

BP350U

BP Solar BP380J

1209 x 537 x 50

80 Wp

17.6 V

4.55 A

7.7 kg

BP380J

BP Solar BP3125S

1517 x 678 x 50

125 Wp

17.4 V

7.20 A

12.0 kg

BP3125S

BP Solar BP3165N

1593 x 790 x 50

165 Wp

35.2 V

4.70 A

15.0 kg

BP3165N

BP Solar BP3170N

1593 x 790 x 50

170 Wp

35.5 V

4.80 A

15.4 kg

BP3170N

up to the top

Smaller BP Modules

BP Solar SX Modules

BP Solar SX Modules Polycrystalline cells.

Laminated toughened glass with lightweight, anodised aluminium 'Universal' frame. Highly resistant to water, abrasion, hail impact and other environmental factors. Includes junction box which accepts cable or conduit and provides field-selection of either 6 or 12 V output.

Made in India/USA. Warranty: 10 years to 90%

Module Number	Dimensions mm	Peak Output	Voltage@ Peak Output	Current@Peak Output	Weight	Data Sheets
BP Solar SX-5M	250 x 273 x 23	4.5 Wp	16.5 V	0.27 A	0.8 kg	SX-5M
BP Solar SX-10U	424 x 273 x 50	10 Wp	16.8 V	0.59 A	1.9 kg	SX-10U
BP Solar SX-20U	424 x 502 x 50	30 Wp	16.8 V	1.19 A	3.0 kg	SX-20U
BP Solar SX-30U	594 x 502 x 50	30 Wp	16.8 V	1.78 A	3.9 kg	SX-30U