|
Rutland 913 Windcharger
Furlmatic FM910-3
Marlec FM 1803
Marlec
manufacture small battery charging wind turbine generators which are
ideal for boats, caravans, stable lighting, electric fencing and remote
power supplies.
The Rutland 913 Windcharger
 This
streamlined upgrade of the original 910 Rutland Windcharger uses a
uniquely designed high inertia three phase generator and aerofoil
blades to give a high, smooth and quiet output.
Their high
efficiency and reliability (3 year maintenance period) make them the ideal power source
for a wide variety of applications.
-
Rating: 80 W in a 22 mph (10 m/s) wind
-
Voltage: 12 or 24 volts DC
-
Rotor Diameter: 0.91m
-
Cut In Windspeed: 5.8 mph (2.6 m/s)
Charging commences at very low
windspeeds (5.8 mph/2.2m/s) yet the windcharger is protected in strong winds.
Marine grade
materials and stainless steel fastenings used throughout. Fits on
41cm inside diameter tubing or 40mm medium gauge galvanised pipe.
Product Code: WG-913/12 (12v)
WG-913/24 (24v)
The FM910-3
Furlmatic
 The
FM910-3 Furlmatic is a high wind site version designed for professional
and industrial users: A furling tail turns turbine out of winds above 35 mph (16 m/s)
to protect the system in gales.
Robust mechanical design combined with
the latest 3 phase generator makes it the ideal battery charger for low
energy applications. Recommended for exposed or unattended sites.
-
Rating: 80W in a 22mph (10m/s) wind
-
Voltage: 12 or 24 volts DC
-
Rotor Diameter: 0.91m
-
Cut in Windspeed: 5.8mph (2.6m/s)
Epoxy coated
galvanised steel case & tail. Stainless steel fasteners
throughout. Mounts onto a 41mm inside diameter tubing or 40mm
medium gauge galvanised pipe.
Product Code: FM-910-3/12 (12v)
FM-910-3/24 (24v)
Rutland Accessories
| HRS Regulator
|
Uses Pulse Width Modulation (PWM) to protect battery
from overcharging by tapering charge as battery becomes full and
reducing the Windcharger speed. Includes LED indicators for charging
status and battery voltage.
Data Sheet
Product Code: HRS-913/12 (12V)
HRS-913/24 (24V) |
|
HRDX Control Unit
|
Wall mounted pre-wired unit allows simple & straightforward
installation. Includes PWM charge regulator; both Windcharger & solar
panel (max. 100W) inputs; dual battery output & selectable digital LCD
display to show wind generator current, solar current, net charge
current, battery 1 voltage & battery 2 voltage. Windgenerator shutdown
switch. Towers.
Data Sheet
Product Code: HRDX/12 (12V)
HRDX/24 (24V)
|
 Tower
Kits
Rutland 913/910 Land Tower Kits
Product Code:
WG910-TWR
Suitable for erection onto concrete
foundations. Recommended for all permanent installations.
Consists of three 2.13m long tower sections with
joiners complete with rigging kit which includes: base plate; foundation
steelwork; adjustable steel guy wires; shackles, turnbuckles & bolts.
Rutland 913
Marine Mounting Kit
Product Code: WG913-KIT
This is suitable
for use on boats and comprises a 2.4m high stainless steel mast.
c/w tube; deck plates; guy brackets; tube joiner; bolts (guys not
supplied
FM910-3 and 913 Tower
Instructions
FM913 Mounting Kit
Specifications
up to the top
Marlec FM 1803
Ideal for remote homes, smallholdings, wind/diesel systems and
telecommunications.
 
-
Rating: 340 W in a 22 mph
(10 m/s)
wind.
-
Voltage: 12 or 24 volts DC.
-
Rotor Diameter:
1.87m
-
Cut In
Windspeed: 6 mph (3 m/s).
This
powerful battery charger can provide a steady power supply for remote
dwellings & telecommunication sites etc. It incorporates the
following features:
Robust two bladed
turbine commences charging at 3.0 m/s (6 mph ) windspeed.
Charges up to 700 watts at
windspeeds of up to 15 m/s (33 mph). As windspeed increases above
this, a furling tail progressively turns the turbine out of the wind,
thus reducing stress in the blades, generator and supporting structure to ensure long term reliability.
Aerofoil
blades combine an efficient profile with a durable composite glass fibre
construction. These are coupled to a unique disc type brushless
generator with a high degree of inertia that keeps the turbine spinning
between gusts of wind to maintain a steady charge into the batteries.
Can be used
in hybrid systems with photovoltaic modules for balanced year round
supply or to reduce diesel generator run times.
The FM 1803
Furlmatic Windcharger is available in 12 or 24 V versions and comes
complete with a sophisticated controller. It starts to
generate power in the lightest breezes yet is protected in high winds
for reliable, efficient performance.
Product Code: FM-1803/12 (12v)
FM-1803/24 (24v)
MPC1
Controller
 This
automatic controller is positioned near to the battery store. It uses
micro-processors to improve stability and power output and features:
Overcharge
protection by stalling the turbine as batteries become fully charged.
Power
matching under varying wind conditions. This minimises transmission
losses and volt drop enabling turbine and battery store to be sited
further apart if need be. Includes high & low windspeed modes.
Manual stall
(brake) switch.
LCD digital
display to show: battery voltage; charge in amps or watts; low or full
battery indication; low wind mode; high wind mode or stall. LED
indicators show operating mode & warnings.
Temperature
compensation ensures battery voltage switching points are adjusted
automatically according to ambient temperature to maintain optimum
battery charging.
Product Code: FM-1803/12 (12v)
Towers
The FM 1803
mounts onto 81mm internal & 91mm external diameter tube.
Tilt-up guyed; lattice or
freestanding towers are all suitable depending upon terrain, height and
application.
up to the top |
