-
BYD Battery-Box Premium HVS/HVM
The BYD Battery-Box Premium HVS and HVM are modular high voltage lithium iron phosphate (LFP) battery packs for use with an external inverter.
-
BYD Battery-Box Premium LVL
The BYD Battery-Box Premium LVL is a high capacity 48V lithium iron phosphate (LFP) battery for use with an external inverter.
-
BYD Battery-Box Premium LVL/LVS BMU
BMU (battery management unit) for use with BYD Battery-Box Premium LVL and LVS battery systems.
-
BYD Battery-Box Premium LVS Connectors
DC battery connectors for the BYD Battery-Box Premium LVS. 1 pair required per stack for connection to the LVS PDU (power distribution unit).
-
Caravan PV Cable Entry Gland
Perfect for providing a waterproof seal around cable entry holes into the roof. Two cable glands - one positve, one negative.
-
Caravan PV Corner Mounting Brackets
Set of four panel corner mounting brackets. Can be used with any aluminium framed solar panel to provide a secure fixing for vehicles, caravans, boats, motorhomes, outbuildings etc. Supports the panel at the optimum height above the surface to enable airflow from underneath, ensuring that it functions to best efficiency.
-
Caravan PV Side Spoiler Mounting Brackets
Fastened to the long sides of the PV panel for extra strength and support. Recommended for larger panels and on vehicles.
-
Cigarette Lighter Type Connectors
The commonest low voltage connector - often already supplied with many 12 V appliances. The ‘Universal’ plugs are high quality plugs with a bayonet catch to ensure firm positioning.
Fused versions available. -
Current Transformers for SMA products
For use with SMA Energy meter and SMA Home Manager to measure AC primary current and produce a proportional secondary current.
-
DC cable label
Where long cable runs are necessary (e.g. over 20m), labels should be fixed along the d.c. cables.
-
DC Induction Ammeter
Clips onto cables (without a break) and shows approximate current and direction of flow. Useful in checking operation of inverters and chargers.
-
DC NiCd Charger
This can be used to charge either 2 AAA, AA, C or D NiCd batteries from a 12 or 24 VDC battery system.
-
DC supply - xxV DC label
Circuit protection and all points of isolation should also be labelled with: 'DC Supply - {insert voltage} V DC'
-
Deks Fast Flash
Used on GSE In-Roof systems as an alternative to Rooflex sealing strip.
-
DEKS HookFlash
The SolarDek™ HookFlash provides a low-cost weather sealing solution for on-roof solar when roof hooks are flashed on slate, concrete or flat profile tiles.
-
DEKS TileFlash
Ideal for rosemary clay tile roofs, the DEKS TileFlash provides a cushion for the roof hook and incorporates cable pass through for up to 4 cables.
*see manufacturer's documentation for further information