Collection: Schletter

Used to join Ballast+ Rail Pro.

Can be fastened between Base Rail Pro to accomodate extra gravel ballast if required.

Used to support ballast blocks more ballast is required than can be accomodated on the Base Rail Pro.

Base rails for Fix Grid Pro mounting system.

Internal connector for joining Ballast Rail Pro.

The Schletter ClampFit Pro Fastener is a simple and cost-efficient solution for mounting modules in landscape on trapezoial metal roofs with a minimum thikness of 0.5 mm.

Used to allow horizontal mounting rails to be quickly & easily fastened to vertical rails.

Used to allow horizontal mounting rails to be quickly & easily fastened to vertical rails.

Aluminium module-bearing profile rails - 450mm length rail is used with 2 x SingleFix Pro (SCH-113009-003).

These allows gradual adjustment of the angle of inclination and are mounted to the Base Rail Pro. It is completed by adding a Module Support Pro, which can also be clicked into place. 

Designed especially for a safe fastening to corrugated fibre cement or trapezoidal sheet metal roofs on a steel substructure avoiding breakage and leaks.

For flat trapezoidal sheet roofs with less than a 10-degree slope, module installation parallel to the roof is not always optimal, due to low yields and inadequate module self-cleaning.

Useful to quickly align and fit Module Support Pro and Elevation Pro to Base Rail Pro

For placing centrally under under each Base Rail support to protect the roof structure.

Can be fastened between Base Rails to accomodate extra ballast.