StorEdge Battery System

Allows connection of the LG Chem RESU H battery to a SolarEdge inverter.

• Simple installation and connectivity of the battery and the SolarEdge Meter
• Connects to the SolarEdge inverter in parallel to the PV strings
• Designed to eliminate DC voltage and current during installation, maintenance, and firefighting

Used to add the StorEdge Solution to PV systems with a SolarEdge three phase inverter or with a non-SolarEdge inverter;

• Compatible with the SolarEdge StorEdge Interface and batteries such as the LG Chem RESU HV
• Monitor battery status, PV inverter production, and self- consumption data for full visibility
• IP65 – Outdoor and indoor installation
• No high voltage or current during installation, maintenance or firefighting for maximum safety
• The StorEdge AC Coupled Inverter does not work with power optimizers or as a standard solar PV inverter

Ideal solution for three phase installations with battery storage.

A hybrid inverter that connects to solar PV and 48V batteries. Suitable for indoor or outdoor installations, inverter models range from 5kW to 10kW.

• Simple installation with single inverter for managing both PV production and battery storage
• Can be installed with or without solar as DC or AC coupled battery storage
• Quick and easy inverter commissioning directly from a smartphone using the SolarEdge SetApp
• Designed to eliminate high voltage during installation, maintenance or firefighting for enhanced safety
• Built-in module-level monitoring and full visibility of battery status, PV production, and self-consumption data
• 12-year standard warranty extendable to up to 25 years
• Compatible with BYD LVS Batteries

The SolarEdge Energy Meter with Modbus Connection measures production, consumption and feed-in to enable export control or limiting (supports G-100 in UK).

A wide range of CTs (current transformers) are available to support residential and commercial installations. Connection to the inverter or Control and Communication Gateway is achieved via RS485.

Highlights:

• High accuracy meter readings (up to 0.5%) for production/consumption readings
• Supplies meter readings to the inverter for Feed-in Limitation
• Suitable for residential, commercial and utility-size installations
• Small and easy to install

Safety Note: CTs must never be operated open-circuit (secondary coil wires disconnected) once installed, whilst on a current-carrying conductor, as dangerously high voltages may occur under these circumstances.

Screened 3 twisted pair comms cable suitable for use with LGChem or BYD battery for communication with SMA Sunny Boy Storage and SolarEdge StorEdge Interface.

• Suitable for RS232 communications
• 24AWG (0.2sqmm) tinned copper wire
• Low Smoke and Fume (LSF) outer sheath
• Colour: Grey
• Temperature Rating : -20°C to +70°C

These have a nominal voltage of 400VDC and are available in two versions suitable for use with the SolarEdge StorEdge systems (SEG type).

Resu 7.0H has a useable capacity of 6.6kWh and peak power of 3.5kW.

Resu 10H has 9.3kWh useable capacity and max. power of 5kW.

The LG-Resu-HV-Handles enable easier and safe lifting of the LG Chem RESU high voltage range of batteries. Consists of 1 x left and 1 x right. The handles can be purchased once and then re-used on subsequent projects. 

Installer Note: All LG Chem RESU battery warranties can only be activated if installed by an installer with relevant certification. Please contact us for details on how to become certified LG Chem installer.

The BYD Battery-Box Premium LVS is a modular lithium iron phosphate (LFP) battery pack for use with an external inverter.

Between 1 and 6 battery modules can be used in a single stack to give 4.0 to 24.0 kWh usable capacity.

Alternatively, up to 16 Battery-Box LVS stacks consisting of between 1 and 4 battery modules can be connected in parallel to give a maximum capacity of 256 kWh. Additional LVS modules or parallel stacks can be added at any time to increase capacity.

1 PDU base and cover is required for each battery stack and 1 BMU per system/inverter 

• Scalable from 4 kWh to 256 kWh
• Maximum flexibility for any application with up to 64 modules connected in parallel
• Compatible with market leading 1 and 3 Phase Inverters
• Cobalt Free Lithium Iron Phosphate (LFP) Battery: Maximum Safety, life cycle and power
• Capable of High-Powered Emergency-Backup and Off-Grid Function
• Patented Internal Plug Design Requires No Additional Wiring
• Self-Consumption Optimization for Residential and Commercial Applications

Note: Commissioning the battery requires a device capable of running the BYD Be Connect App - available for the Apple App Store and Google Play Store.

BMU (battery management unit) for use with BYD Battery-Box Premium LVL and LVS battery systems.

Available in IP20 and IP55 versions.

BYD-LVL/LVS-BMU normally for use with the BYD LVL which is IP20 rated.
BYD-LVL/LVS-BMU-IP55 normally for use with the BYD LVS which is IP55 rated.

DC battery connectors for the BYD Battery-Box Premium LVS. 1 pair required per stack for connection to the LVS PDU (power distribution unit).