EasySolar Off-Grid Kits

Off-grid kit to power AC loads. Uses a 12V 2.4kWh battery store and 3x 325W solar panels. Perfect for applications such as boats, caravans, vehicles, stables or weekend cabins.

• Battery
• Sealed and maintenance free
• ~4.8kWh battery (~2.4kWh usable at 50% DOD, C20)
• 800 cycles to 50% DOD (depth of discharge)

More information

Consider adding:

• VBMV-700S battery monitor for state of charge of the battery in %.
• VBMV-WM wall mount box for battery monitor
• V-CC-GX Colour Control display for local and remote monitoring
• V-CC-WM wall mount box for Colour Control
• SKT-704 3 panel ground mount system
• V-MK3-USB cable for programming the inverter/charger

Additional components also required:

• Mounting system for solar panels (see example above)
• Nuts, bolts and washers for battery connection

In this kit

• 3 x REC-325TP2M | 325 Wp REC TwinPeak2 mono, black frame, white backsheet
• 6 x C1-4/MCMF5(2) | MC extension cable assembly 5m long male/female (MC4)
• 1 x VES-12/1600/70 | Victron Easy Solar 1600VA, 12V inv/chrg, 1 MPPT 100/50
• 1 x BIS-3 | 300A Battery isolator switch, 900A for 30 secs, 48 Volt, M10
• 2 x C-35/10 | 35 sq mm cable terminal lug (M10 stud)
• 2 x RB-TC/RED | Rolls 4000/4500/5000 Terminal cover red
• 2 x RB-TC/BLACK | Rolls 4000/4500/5000 Terminal cover black
• 2 x RB-INTERLINK4000 | Rolls 4000/4500/ Interlink cable 50sqmm-300mm, M8 - M8
• 2 x RB-R12-200AGM | Rolls Solar AGM Series 2, 12V, 220Ah (C100), 162Ah (C10)

Off-grid kit to power AC loads. Uses a 24V 3.1kWh battery store and  6x 325W solar panels. Perfect for applications such as remote buildings or small/temporary offices and accommodation.

• Battery
• Sealed and maintenance free
• ~6.2kWh battery (~3.1kWh usable at 50% DOD, C20)
• 1250 cycles to 50% DOD (depth of discharge)

More information

Consider adding:

• VBMV-700S battery monitor for state of charge of the battery in %.
• VBMV-WM wall mount box for battery monitor
• V-CC-GX Colour Control display for local and remote monitoring
• V-CC-WM wall mount box for Colour Control
• SKT-704 3 panel ground mount system
• V-MK3-USB cable for programming the inverter/charger

Additional components also required:

• Mounting system for solar panels (see example above)
• Nuts, bolts and washers for battery connection

In this kit

• 6 x REC-325TP2M | 325 Wp REC TwinPeak2 mono, black frame, white backsheet
• 6 x C1-4/MCMF5(2) | MC extension cable assembly 5m long male/female (MC4)
• 1 x VES-24/1600/40 | Victron Easy Solar 1600VA, 24V inv/chrg, 1 MPPT 100/50
• 1 x BIS-3 | 300A Battery isolator switch, 900A for 30 secs, 48 Volt, M10
• 2 x C-25/10 | 25 sq mm cable terminal lug (M10 stud)
• 2 x RB-TCAGM/R | Terminal cover for Rolls AGM & Vic lithium batteries, red
• 2 x RB-TCAGM/B | Terminal cover for Rolls AGM & Vic lithium batteries, black
• 1 x RB-INTERLINK4000 | Rolls 4000/4500/ Interlink cable 50sqmm-300mm, M8 - M8
• 2 x RB-S12-290AGM | Rolls Solar AGM Series 5, 12V, 290Ah (C100), 234Ah (C10)

Off-grid kit to power AC loads. Uses a 48V BYD 5.12kWh battery store and 10x 325W solar panels. Perfect for applications such as remote buildings, offices or accommodation.

• Battery
• Lithium-ion sealed and maintenance free
• 5.12kWh battery (100% usable)
• 10 year manufacturer's warranty

More information

Consider adding:

• SKT-708 5 panel ground mount system
• BYD-BBOX-CAB battery cabinet to enclose batteries also allowing expansion of the battery at a future date (battery brackets and BMU would no longer be required)

Additional components also required:

• Mounting system for solar panels (see example above)
• V-MK3-USB cable for programming and updating firmware of the inverter/charger
• Additional solar extension cables depending on solar layout

In this kit

• 10 x REC-325TP2M | 325 Wp REC TwinPeak2 mono, black frame, white backsheet
• 2 x C1-4/MCMF20(2) | MC extension cable assembly 20m long male/female (MC4)
• 1 x PV-SW-2-20/660V | 4 pole (2 string) DC isolator 20A @ 660VDC, 12A @ 800VDC
• 1 x C-6/6 | 4-6 sqmm cable, insulated crimp terminal. Ring 6mm (pack 10)
• 1 x VES-II-48/3000/35-GX | Victron EasySolar-II 48/3000/35-32 MPPT250/70, GX interface
• 1 x FB-NH00-2 | 2- pole HN00 fused disconnect, M8 fixings 220VDC, 160ADC max
• 2 x F-NH000-100 | NH000 100A fuse, 250VDC, For 00 fuse holder
• 2 x CW-35 | 35sqmm inverter/battery tinned copper cable per m
• 4 x C-35/8 | 35 sq mm cable terminal lug (M8 stud)
• 2 x BYD-B-PLUSL | BYD B-Plus LV battery module 2.56 kWh inc cable set, 48V
• 1 x BYD-BMU | B-Box Battery Management Unit inc cables for 1 battery
• 2 x BYD-BKT | BYD Battery Box bracket and cover for LV battery
• 1 x C5-UTP1 | RJ45 UTP cable 1 metre blue booted
• 1 x VE-COMCABLE/BYD | VE.Can CAN-bus BMS type A cable1.8m for BYD LV & Victron

Off-grid kit to power AC loads. Uses a 48V BYD 10.24kWh battery store and 18x 325W solar panels. Perfect for applications such as homes or offices where connection to the grid is not possible/cost effective.

• Battery
• Lithium-ion sealed and maintenance free
• 10.24kWh battery (100% usable)
• 10 year manufacturer's warranty

More information

Consider adding:

• SKT-704 3 panel ground mount system

Additional components also required:

• Mounting system for solar panels (see example above)
• V-MK3-USB cable for programming and updating firmware of the inverter/charger
• Terminal crimps for terminal block in combiner box

In this kit

• 1 x VES-48/5000/70 | Victron Easy Solar 5000VA, 48V inv/chrg, MPPT 150/100, CCGX
• 2 x INV-CB2 | Inverter cable 70 sqmm 2 m long M8-M8
• 2 x C-70/10 | 70 sq mm cable terminal lug (M10 stud)
• 1 x BIS-3 | 300A Battery isolator switch, 900A for 30 secs, 48 Volt, M10
• 4 x BYD-B-PLUSL | BYD B-Plus LV battery module 2.56 kWh inc cable set, 48V
• 1 x BYD-BBOX-CAB | BYD Battery Box cabinet (4x2.5) including BMU, 48V
• 1 x VE-COMCABLE/BYD | VE.Can CAN-bus BMS type A cable1.8m for BYD LV & Victron
• 18 x REC-325TP2M | 325 Wp REC TwinPeak2 mono, black frame, white backsheet
• 6 x C1-4/MCMF10(2) | MC extension cable assembly 10m long male/female (MC4)
• 1 x PV-CB8/1 | PV IP66 Combiner Box 6 strings 254 X 180 X 111mm (empty)
• 6 x F-ATM15(1000V) | 15A 1000VDC gPV fuse (fits Helio fuse holder)
• 6 x FH-HELIO | Helio PV String Fuse holder - 1000VDC, 30A
• 1 x F-JUMPER | Jumper Bar for Helio fuse holder (13 way) with end caps
• 2 x F-FEEDER | Feeder terminal for Helio fuse holder (90A) 25sqmm
• 1 x PV-CB/TB8 | Terminal Block 8mm
• 1 x PV-CB/TB-COVER8 | Terminal Block Cover/Partition/End for term block 8mm
• 8 x C1-10/ELD | 10.0 sq mm single core solar cable 6.9mmOD, per metre
• 2 x C1-10/MCM | Multi-contact MC4 negative male connector,10sqmm cable, 43A
• 2 x C1-10/MCF | Multi-contact MC4 positive female connector,10sqmm cable,43A