Collection: Marlec

Rating: 404 W in a 11 m/s (24.6 mph) wind.
Voltage: 12,24 or 48 volts DC.
Rotor Diameter: 1.8m
Cut In Windspeed: 3 m/s (6.7 mph)

Rating: 72 W in a 11 m/s (24.6 mph) wind.
Voltage: 12 or 24 volts DC.
Rotor Diameter: 0.91m
Cut In Windspeed: 2.5 m/s (5.6 mph)

This 5m extension for Solar iBoost+ allows extension of the cable between the sender and the clamp sensor. This can be useful in properties with thick walls where moving the sender to the other side of a wall will help ensure good signal strength between the Solar iBoost+ and the sender.

The Marlec iBoost Buddy enables remote monitoring and boost control of the Solar iBoost+ immersion controller.

The Marlec Solar iBoost+ automatically diverts excess solar generation (normally exported to the grid) to an immersion heater saving money on water heating costs, reducing use of the boiler and increasing self-consumption of free solar energy.

Rating: 290 W in a 11 m/s (24.6 mph) wind.
Voltage: 12 or 24 volts DC.
Rotor Diameter: 1.2m
Cut In Windspeed: 2.5 m/s (5.6 mph)

Used to mount the Rutland 914 Windcharger on boats

Suitable for erection onto concrete foundations. Recommended for all permanent installations.
Consists of three 2.13m long tower sections with joiners complete with rigging kit which includes:

Rating: 140 W in a 11 m/s (24.6 mph) wind.
Voltage: 12 or 24 volts DC.
Rotor Diameter: 0.91m
Cut In Windspeed: 3.1 m/s (6.9 mph)

HRSI Regulator
Uses Pulse Width Modulation (PWM) to protect battery from overcharging by tapering charge as battery becomes full and reducing the Windcharger speed. Includes LED indicators for charging status and battery voltage. Includes facility for connection of up to 160W of PV. Features windcharger shutdown switch.

The VEVA is a UK-made, next-generation EV (electric vehicle) charger. The VEVA has been designed to be intuitive and user-friendly, whilst installers benefit from quick and simple commissioning.