Collection: Products

The SolarDek™ HookFlash provides a low-cost weather sealing solution for on-roof solar when roof hooks are flashed on slate, concrete or flat profile tiles.

The SolarDek™ PanelDrain provides optimal water drainage for any solar panel setup. Many solar panels have self-cleaning properties but often don't perform well at low angles. The DEKS innovative water drain clip is specifically designed to enhance solar panel performance by reducing water and dust accumulation. 

Ideal for rosemary clay tile roofs, the DEKS TileFlash provides a cushion for the roof hook and incorporates cable pass through for up to 4 cables.

Dektite® fixing kits are designed for use with DEKS EPDM flashings on metal roofs. The FX901 kit (As shown) contains 1 x 75ml tube of low modulus Silicone, 25 x self-drilling screws, 25 x colour caps (silver) 1 x fixing instruction leaflet.

The speciality flashing for solar PV cables on tile or slate roofs

Perfect for Flashing Cables on Metal Roofs

This meter can be DIN rail mounted for use inside enclosures or distribution boards.

Connectors readily accessible to ordinary persons shall be of the locking type, requiring a tool or two separate actions to separate and shall have sign attached that reads: 'Do not disconnect d.c. plugs and sockets under load'.

This cable is designed to meet the requirements of the DC interconnections between the solar panels and the other components of the photovoltaic system, such as the isolators and inverters.

PV-Ultra cable with galvanised steel wire armour (SWA) to provide mechanical protection, making it ideal for direct burial and installation in demanding environments.

This contains 30 ST blade fuses which incorporate LEDs to show when fuse has blown.

These Stainless Steel Edge Fastening Cable Clips enable simple, durable cable management on solar PV systems. They can be easily attached directly to the solar panel frame by hand and have a high extraction force to provide secure fixing. Rounded edges protect cable insulation from damage.

These Edge Fastening UV Resistant Cable Ties enable simple cable management on solar PV systems. The ties can be attached directly to the solar panel frame so are ideal for systems without rails. The cable tie head can be moved after bundling.

These bi-directional meters are needed for PV installations using DC-coupled battery storage or hybrid (PV and battery) inverters.

The Emlite single phase meter provides a compact solution for many metering applications. Fully approved in accordance with the Measuring Instruments Directive (MID), this highly accurate meter may be used for utility billing or micro-generation metering.