-
Morningstar Communication Adaptors
Morningstar’s PC MeterBus Adapter converts a controller’s MeterBus RJ-11 to a standard RS-232 serial connector for connection to a PC or other equipment. The MSC may be used with any Morningstar controller or inverter equipped with a meter connection that does not also already have a RS-232 port. Communications link enables monitoring and logging of data as well as customizing of set points.
-
Morningstar SunSaver
These are the ideal controller for small professional and consumer systems. Fully encapsulated, they are approved for hazardous locations.
-
Morningstar SunGuard
This is the ideal controller for one-module systems. Fully encapsulated in epoxy potting, they can be mounted in battery enclosures and are weatherproof. Connection via 200mm leads.
-
Morningstar TriStar
These powerful tropicalised three-function PWM controllers provide reliable solar battery charging, load control or diversion regulation to divert excess power to a dump load for use in solar, wind or hydroelectric systems. (Two or more controllers may be used to provide multiple functions). Large heat sink enables operation at up to 45°C without de-rating. 3 LED's indicate battery status, alarms and faults. Optional LCD digital backlit display (included with -M version) provides system & controller information: battery voltage; current; temperature; amp-hours and error mode. Versions mount either on face of the controller or remotely. For use in either 12, 24 or 48V systems. Fully adjustable with DIP switches. RS232 communication for custom settings, data logging, remote monitoring/control. Reverse polarity, short circuit, over-current, high temperature and over-voltage protection. Operation from - 40 to+ 45°C. Terminals take up to 35sqmm cables.
-
Morningstar ProStar MPPT
The Prostar MPPT™ solar charge controller uses TrakStar Technology™ for advanced maximum power point tracking (MPPT) battery charging. Suitable for Lithium, Nickel Cadmium, and Lead Acid battery types.
-
Morningstar EcoBoost MPPT™
The EcoBoost MPPT™ solar charge controller brings Morningstar's proprietary TrakStar Technology™ to their Essentials controllers and accessories.
-
Morningstar MeterHub
The MeterHub supports the connection of up to 15 Morningstar products on a single MeterBus network. It electrically isolates the devices that supply power to the network to prevent damage in the event of grounding problems. Five status LED’s indicate the proper network connection to each port.
-
MorningStar ReadyShunt
Works with GenStar MPPT Fully-Integrated DC Solar Charge Controller
-
MorningStar ReadyRelay
Works with GenStar MPPT Fully-Integrated DC Solar Charge Controller
-
Morningstar GenStar MPPT
The new GenStar MPPT is the first model in Morningstar’s new Integrated Series and represents the industry's first truly "smart" controller with all built-in intelligence, communications, and control features instead of requiring additional external components.
-
Morningstar ReadyBMS
Works with GenStar MPPT Fully-Integrated DC Solar Charge Controller
-
Morningstar TriStar MPPT 600V
The TS-MPPT-600V controller is built for easy installation, set-up and use. Its self-diagnostics & electronic error protections make installation easier and prevents the chance of installation mistakes / system faults. It is also equipped with 8 adjustable switches to make system set-up & configuration simple.
-
Morningstar TriStar MPPT
The industry-leading TriStar MPPT with TrakStar Technology is an advanced maximum power point tracking controller for larger off-grid photovoltaic (PV) energy systems up to 4.2kWp. An iconic design, TriStars have been proven in solar installations around the globe and remain the first choice for designers of mission-critical systems where failure is not an option.
-
Temperature Sensor
Improves battery charging by using temperature at the battery for very accurate temperature compensation. (Included with TS-MPPT)
-
Morningstar SunSaver MPPT
This controller has an advanced maximum power point tracking (MPPT) battery charger for off-grid PV systems. The controller features a smart tracking algorithm that maximizes the energy harvest from the PV and also provides load control to prevent over discharge of the battery. It is ideal for both professional and consumer PV applications.
-
Morningstar SunSaver Duo Charge Controller
For use with systems using two separate batteries eg boats and motorhomes. Includes remote meter to show system status and errors.
*see manufacturer's documentation for further information