Collection: Flat Roof Mounting Systems

A simple single panel flat roof mount which fits panels between 800mm and 1200mm wide and uses ballast blocks to avoid having to penetrate the roof covering.

Used to join Ballast+ Rail Pro.

Can be fastened between Base Rail Pro to accomodate extra gravel ballast if required.

Used to support ballast blocks when more ballast is required than can be accommodated on the Base Rail Pro.

Base rails for Fix Grid Pro mounting system.

Internal connector for joining Ballast Rail Pro.

These allows gradual adjustment of the angle of inclination and are mounted to the Base Rail Pro. It is completed by adding a Module Support Pro, which can also be clicked into place. 

Useful to quickly align and fit Module Support Pro and Elevation Pro to Base Rail Pro

Designed to provide higher ground clearance for green roofs. FixGrid Pro support plates allow each elevation element to be braced to guarantee stability at heights of up to 35 cm—even in the most extreme conditions.

For placing centrally under under each Base Rail support to protect the roof structure.

Can be fastened between Base Rails to accommodate extra ballast.

Base rail for Schletter FlatGrid and FixGrid 18 systems.

Use the lower FixZ support together with the FixZ centre supports (for the east-west direction) or with the upper FixZ profiles (for the south direction).

Accepts Proline module clamps for fastening of modules.

Used to connect Module Support Pro, Elevation Pro or Ballast+ Rail Pro to Base Rail Pro.

Provides a fixing point for the Schletter FlatGrid Pro mounting system, allowing it to be installed on roofs with a pitch between 3° and 10°.