Collection: Products

Clamps for Solarport ground mounts.

Fixings for Solarport's modular ground mounts.

Foundation sets for the Solarport ground mount system. Choose your foundation type and order 1 set per upright.

Ground screw systems provide an efficient installation method for hard to normal ground types, when there is limited machinery or the system needs to be removed after use.

Driven steel piles are the most common form of foundation found in ground-mount solar installation. They are traditionally installed using a piling rig, but can be set into concrete if required.

Solarport's patented X Anchor foundation solution makes it possible to install large and small scale ground mounted solar PV systems with the use of only hand tools.

This enables small DC appliances such as chargers, radios & computer games etc. to be powered from a 12 or 24 V battery system with an output that can be switched to 12, 9, 7.5, 6, or 3 volts. Max output current is 1.5 A depending upon input & output voltages.

• Easy to install 4 fused circuits using blade fuses
• Mounts on the battery terminal stud
• Screw terminals for securing wires

Standard blade type fuse, 32 V DC rated

Complete tool for the assembly of the original MC4 connectors.

Crimping pliers for crimping both MC4 and MC4-Evo 2 connectors

Stäubli MC4 branch connectors for parallel connections.

• Locking fit
  
• IEC 62852 DC voltage rating - 1000V
• IEC 62852 DC Current rating - 39A (4-6sqmm cable), 45A (10sqmm cable)
  

This test plug is used to check the correct location of the MC4 EVO 2 contact in the insulation.

This test plug is used to check the correct location of the MC4 contact in the insulation.