Collection: Products

Various cables to communicate with Victron products that have a VE.Direct connection.

The VE.Bus BMS V2 is a Battery Management System (BMS) designed to interface with and protect a single, or multiple Victron Lithium Battery Smart 12,8V & 25,6V (LiFePO4 or LFP) in systems that have Victron inverters or inverter/chargers with VE.Bus communication. It monitors and protects the batteries against over voltage and under voltage of any individual cell, and also over temperature or under temperature conditions.

This bluetooth accessory for Victron inverter/chargers: Multis, MultiPlusses, MultiPlus-II, Quattros, and Phoenix Inverters with a VE.Bus port enables remote system monitoring and operation using the VictronConnect app.

Used to in either VE.Can or BMS-CAN ports to terminate the CAN-bus network. Includes 2 terminators for use at both end points of the CAN-bus network.

Use these VE.Can to CAN-bus cables to connect a CAN-bus enabled battery to a VenusOS device.

The Victron VE Direct Bluetooth Smart Dongle enables Victron MPPT Charge Controllers*, Battery Monitors* and Pheonix Inverters* to display information on IOS, Android, Windows or Mac OS X devices using the VictronConnect app.

The Victron Venus GX provides intuitive control and monitoring. It offers the same functionality as the Victron Colour Control GX, minus the display and buttons making more cost effective.

Wall mount enclosures for Victron displays.

The Victron AC Current Sensor is used to measure AC current, Power (VA) and calculate the energy produced by a solar PV inverter connected to the AC input or output of a Victron MultiPlus or Quattro.

Oscillating wall or table mounted fan. c/w chrome fan guard & adjustable bracket. 15 cm diameter.

Dual supply labelling should be provided at the service termination, meter position and all points of isolation between the PV system and supplier terminals to indicate the presence of on-site generation and indicating the position of the main a.c. switch disconnector.

For use on all equipment directly supplied by a wind turbine.

• For use with ST blade fuses
• Supplied with 12 AWG (3.31 sq mm) pigtails
• 30A Maximum fuse amperage

These fluorescent lights are perfect for efficient lighting both for external use and in high humidity conditions (IP65 rated). Tough GRP casing with rubber seal and clear polycarbonate lens held in place by clamps to provide a watertight seal.

Pack containing labels needed for a typical domestic wind turbine installation