Collection: Products

These Victron SmartSolar Charge Controllers support a PV input with a maximum open circuit voltage of 100V and have a maximum output of up to 50A. They work with and will automatically recognise 12V and 24V battery systems.

This Victron SmartSolar Charge Controller supports a PV input with a maximum open circuit voltage of 150V and have a maximum output of up to 35A. They work with and will automatically recognise 12V, 24V and 48V battery systems (36V also possible via software configuration).

These Victron SmartSolar Charge Controllers support a PV input with a maximum open circuit voltage of 150V or 250V and have a maximum output of up to 70A. They work with and will automatically recognise 12V, 24V and 48V battery systems (36V also possible via software configuration).

Identical to the SmartSolar Charge Controller MPPT but with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply “daisy chained” to each other with a single RJ45 cable between the individual units.

These Victron SmartSolar Charge Controllers support a PV input with a maximum open circuit voltage of either 75V or 100V and have a maximum output of up to 20A. They work with and will automatically recognise 12V, 24V and 48V battery systems (48V with SmartSolar 100/20-48 only).

This Victron SmartSolar Control Display is a retrofittable LCD display for Victron's SmartSolar Charge Controllers. Simply remove the rubber seal that protects the plug on the front of the charge controller and plug-in the display.

The MPPT RS SmartSolar is a 48V Solar charge controller with up to 450VDC PV input and either 100A or 200A output. It is used in on-grid and off-grid solar applications where maximum battery charging power is required.

Temperature sensor for MultiPlus, Quattro and Venus GX products.
MultiPlus and Quattro units are supplied with this temperature sensor.

Various cables to communicate with Victron products that have a VE.Direct connection.

The VE.Bus BMS V2 is a Battery Management System (BMS) designed to interface with and protect a single, or multiple Victron Lithium Battery Smart 12,8V & 25,6V (LiFePO4 or LFP) in systems that have Victron inverters or inverter/chargers with VE.Bus communication. It monitors and protects the batteries against over voltage and under voltage of any individual cell, and also over temperature or under temperature conditions.

This bluetooth accessory for Victron inverter/chargers: Multis, MultiPlusses, MultiPlus-II, Quattros, and Phoenix Inverters with a VE.Bus port enables remote system monitoring and operation using the VictronConnect app.

Used to in either VE.Can or BMS-CAN ports to terminate the CAN-bus network. Includes 2 terminators for use at both end points of the CAN-bus network.

Use these VE.Can to CAN-bus cables to connect a CAN-bus enabled battery to a VenusOS device.

The Victron VE Direct Bluetooth Smart Dongle enables Victron MPPT Charge Controllers*, Battery Monitors* and Pheonix Inverters* to display information on IOS, Android, Windows or Mac OS X devices using the VictronConnect app.

The Victron Venus GX provides intuitive control and monitoring. It offers the same functionality as the Victron Colour Control GX, minus the display and buttons making more cost effective.