For use with Commercial Gateway this ambient temperature sensor measures the surrounding temperature. The sensor's measurement signal is 0 to 10V covering a -40 to +90°C range.

Simple Wireless Connectivity

The cellular plug-in provides wireless communication between the inverter and the SolarEdge monitoring platform. The plug-in is installed inside the SolarEdge inverter and connected to an external antenna (included in the package), simplifying the communication setup and saving installation time.

The SolarEdge Commercial Gateway provides a range of further control options and integrations.

The SolarEdge Energy Meter with Modbus Connection measures production, consumption and feed-in to enable export control or limiting (supports G-100 in UK).

The SolarEdge inverter warranty is extendable to 20 or 25 years, depending on inverter model. SolarEdge manage a rapid RMA process and generally ship a replacement unit within 48 hours, given the reported defect is eligible for coverage under the Limited Product Warranty.

The Firefighter Gateway provides centralised safety management of SolarEdge systems.

The SolarEdge GSM Plug-in provides wireless communication between the inverter and the SolarEdge monitoring server. This enables monitoring of the SolarEdge system on the SolarEdge monitoring portal without internet infrastructure on site.

SE-ENET-HBNP is compatible with SolarEdge Home Network ready inverters with the following part number format: SE…-…BExx

For use with Commercial Gateway, this irradiance sensor is a high-quality solar cell. It measures solar irradiance levels for photovoltaic systems. The sensor's irradiance output signal is 0 to 1V covering a 0 to 1000W/m2 range.

For use with Commercial Gateway this module temperature sensor measures the temperature at the back of the photovoltaic module. The sensor's measurement signal is 4 to 20mA covering a -40 to +90°C range.

 Commercial solution for use with three phase inverters connecting two modules per power optimiser, for lower installation costs.

The SolarEdge RS485 Plug-in provides an additional RS485 port for the inverter for enhanced communications. The kit contains a module which is installed on the communication board and has a 3-pin RS485 terminal block.

RS-485 Surge Protection Device for three phase inverters with SetApp configuration from 12.5 - 27.6 kW

Connected by installers to the PV module and compatible with a wide range of modules