Collection: Products

The Victron Colour Control GX provides control and monitoring for your Victron system through a colourful graphical display.

This long range dual-band wireless-N USB network adapter enables the Victron Colour Control GX to connect to a WiFi network via the Colour Control's USB connection.

Wi-Fi dongle to connect Colour Control to WEP, WPA and WPA2 secured networks where running a network cable to router or access point is unsuitable. 

Single-phase and three-phase energy meters for Victron ESS systems.

Current transformer for the MultiPlus-II to implement PowerControl and PowerAssist optimising self-consumption with external current sensing.

Used for instance to connect engine starter and service batteries to allow charge from the same alternator, whilst prioritising charge to the starter battery.

The Cyrix-Li-Charge will connect a battery charger with 3 seconds delay: – if the Charge Disconnect output of the VE.Bus BMS is high, and – if it senses 13,7V (resp. 27,4V or 54,8V) or more on its battery charger connection terminal, and – if it senses 2V or more on its battery terminal (the Cyrix will remain open, if not connect to the battery).

The Cyrix-Li-load will disengage when its control input becomes free floating. If the battery voltage recovers after disconnection (which will happen when no other loads are connected to the battery), the output of the BMS will become high and the Cyrix will reengage after 30 seconds. After 3 attempts to reengage, the Cyrix will remain disengaged until battery voltage has increased to more than 13 V (resp. 26 V or 52 V) during at least 30 seconds (which is a sign that the battery is being recharged).

The Victron Digital Multi Control GX is remote control panel for Multiplus & Quattro inverter/chargers. It includes a rotary knob to set power control and power assist levels for two AC sources.

These are used to guarantee continuous DC power to mission critical equipment, such as an electronic engine control system. With a diode battery combiner two or more DC power sources can be used in parallel to supply the mission critical load. Failure of one source will not interrupt power to the critical load.

The Victron EasySolar  an all-in-one solar power solution, combining an MPPT solar charge controller, an inverter/charger and AC breakers for distribution all in one enclosure.

The Victron EasySolar-II GX combines an MPPT Solar Charge Controller, inverter/charger and control hub with display in one enclosure.

The Ekrano GX is a fully featured communication centre, built with the latest remote monitoring capabilities. Gain ultimate control with this latest addition to the GX family and feel the power of truly being in charge.

Check real-time data and analysis on your integrated 7-inch touchscreen display, running on the all-new and intuitive Venus OS. The Ekrano GX is a flexible powerhouse that will integrate into any Victron system complete with a range of hardware connectivity to suit every need. It enables you to access and control your system from anywhere, through the Victron Remote Management (VRM) portal and VictronConnect app. Enter a new era of full and dynamic system control with the Ekrano GX.

The Victron VM-3P75CT energy meter is a standard device to measure the power and energy of single- and three-phase applications, for example, at the distribution box or to measure the output of a PV Inverter, AC Genset or the output of an inverter and inverter/charger.

The Victron ESP DC link box facilitates connection of the primary DC protection, DC monitoring and sensor connections into one simple to fit enclosure.

This device will bring 4G LTE-M connectivity to all VE.Direct enabled devices without any monthly fees or subscriptions, for the first five years.